DESCRIPTION
LM018PQQ01EN is a sunlight readable TFT LCD module with high brightness of 1000 cd/m2 (typical value). LM018PQQ01EN is a color TFT LCD with 128x160 resolution, diagonal size 1.77 inch. This TFT model is built in with ST7735S driver IC.LM018PQQ01EN supports 8-BIT MCU interface; it’s available for Resistive Touch Screen (RTP) and Projected Capacitive Touch Screen (CTP) optional.
The supply voltage for logic (VCC) of LM018PQQ01EN is from 2.5V to 4.8V, typical value 2.75V. It is featured with Glare surface panel, View Direction 6 o'clock, Gray scale inversion 12 o'clock, It can be operating at temperatures from -20℃ to +70 ℃ and storage temperatures from -30 to +80 ℃. LCD-Mall’s sunlight readable TFT LCD is perfect for outdoor measuring equipment, industrial measuring equipment, testing equipment, measuring tools, measuring instruments, etc.
| Pin No. | Symbol | Description |
| 1 | GND | Power ground. |
| 2 | IOVCC | Power Supply for I/O system. |
| 3 | VCC | Power Supply for I/O Analog |
| 4 | CSB | Chip Selection Pin.-Low Enable. |
| 5 | RST | This signal will reset the device and it must be applied to properly initialize the chaip.-Signal is active low. |
| 6 | RS | Display data/command Selection Pin in MCU Interface. -RS=”1“：Display Data or Parameter. -RS=”1“：Command Data. -If not used, please fix this pin at IOVCC or GND level. |
| 7 | WRB | Write Enable in 8080 MCU Parallel Interface.-If not used, please fix this pin at IOVCC or GND level. |
| 8 | RDB | Write Enable in MCU Parallel Interface.-If not used, please fix this pin at IOVCC or GND level. |
| 9-16 | DB0~DB7 | D[7:0] are used as MCU parallel interface data bus. |
| 17 | BL_A | Anode of LED backlight. |
| 18 | BL_K | Cathode of LED backlight. |
| 19 | TE | Tearing effect output pin to synchronies MCU to frame rate, activated by S/W command. -If not used, please open this pin. |
| 20 | GND | Power ground. |
| Item | Dimension | Unit | ||||||
| Size | 1.77 | inch | ||||||
| Dot Matrix | 128*RGB*160(TFT) | dots | ||||||
| Module dimension | 31.4*42.9*3.05 | mm | ||||||
| Active area | 28.032*35.04 | mm | ||||||
| Dot pitch | 0.219*0.219 | mm | ||||||
| LCD type | TFT/TRANSMISSIVE | |||||||
| View Direction | 6 O' CLOCK | |||||||
| Gray Scale Inversion Direction | 12 O' CLOCK | |||||||
| Backlight Type | LED, Normally White | |||||||
| LCD Controller IC | ST7735S | |||||||
| Pcap Controller IC | ||||||||
| LCD Interface | 8-BIT MCU | |||||||
| Pcap Interface | ||||||||
| Touch Panel | ||||||||
| Surface | GLARE | |||||||
Item | Symbol | Min | Typ | Max | Unit | |
| Operating Temperature | TOP | -20 | 70 | ℃ | ||
| Storage Temperature | TST | -30 | 80 | ℃ | ||
Item | Symbol | Condition | Min | Typ | Max | Unit |
| Input Power | VCC | 2.5 | 2.75 | 4.8 | V | |
| Supply current (One LED) | ILED | 20 | mA |
RELATED PRODUCTS
Professional LCD and Touch Manufacturer / Design Solution
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
PRODUCT MESSAGE