temperature sensors, monitors, controls.
Custom temperature monitoring and control instruments with custom packaging, control sorting and data-
Alba Enterprise Co. , Ltd. See Hot-
Arno instrumentsLine of high-temperature-
Including customized sensing instruments
Manufacture of thermocouple for heavy dutyand light-
Apply for duty.
K, J or T-type hands-
Fixed thermocouple that can be used with any thermometer as well as digital and analog panel thermometers.
Single analog instrument availableand multiple-Circuit design.
Advanced Test product model DT-130 temperature-
The range of measuring instruments is from-
100 F to 1999 F, fast response, standard industrial type-
K thermocouple probe, resolution 0. 1 or 1[degree]
And LCD display.
Optional probes include general purpose, surface, air-
Gasoline and subcutaneous injection
DT models are also available
136, dual-input version of DT-130. Model AM-
50 is an LCD industrial multimeter with direct temperature reading capability40 F to 800 F. Features over-
Low range indication
Automatic battery indication
Zero in all ranges, reverse-
Polarity Indication and diode-test range. TPK-
Type 59 K thermocouple model AM-52, 57, and 59. Optional on AM-
50, 53 and 56 models. ANALOGIC CORP.
Model AN2402 1/8-DIN panel-
Temperature Controller with front
Settings, calibration, and operation of the panel selection.
Wide input range of thermocouple, 1 [degree]or 0. 1[degree]
Resolution, C-level or F-level scale and programmable filter.
Options include dual interface, dual interface
Relay setting point and analog output with independent ratio.
There are also models AN2406 1/2-
DIN controller with 1 [degree], 0. 1[degree]
C resolution of 2-, 3-and 4-
The wire RTD measurement has the same option as the an2402.
Anderson technologies udc 700 digital controllers reliably control less complex processes in spacesaving 1/32-DIN size.
The unit has a universal power supply and input, two local settings and meets the following criteria4/IP66 front-
Optional devices include RS485, Modbus communication, or a second alarm relay.
The device can be used to control the temperature and other process variables in applications such as oven, molding and extrusion, dryer, packaging machinery, etc. Micro-processor-based low-
Cost UDC 1000 and UDC 1500 digital controllers are fully dedicated to monitoring temperature and pressure in a variety of applications, 1/16-and 1/8-DIN sizes. Large and easy-to-read dual four-
Simple configuration with digital display and tactile keyboard.
Features include universal input and power supply to meet the following standards3/IP65 front-
Panel protection, auto/manual mode and selfTuning softwareRS-
Optional 485 Modbus communication and up to two additional outputs.
The C-Series temperature controller has four DIN sizes, as well as a model with no indication for sub-panels. The 1/16-
DIN and larger modelsin 8-
Liquid level ramp/soak control and standard options including Modbus communication and DIN-rail-
The gateway installed in the device network control network.
Features include signal input for J, K, N, R, S, B, C, E, NNM and Platinel II thermocouple, 2-or 3-
Line RTDs and line light source;
Large LED display capable of decimal reading of 0.
1 degree, double output/alarm, on-site-
Configurable process and deviation alerts, and automatic/manual transmission without disturbance.
Tudor temperature sensors include a full range of highand low-
Temperature thermocouple, RTDs, thermal resistors, temperature transmitter probes and accessories.
Solid PH series-
The state power relay is supplied backto-
Reverse scr output for resistance heating applications with false turns-
About immunity and forward
Turn off at high dV/dt.
SH series solid-
State control is singlephase, three-phase, three-leg; or three-phase, two-leg versions.
DIN rails or panels can be installed.
Also provides turnkey customer design and manufacturing for embedded controls.
ATKINS Technology Co. , Ltd. Line of hand-
Handheld Digital thermocouple thermometers for measuring melting, molds, barrels, templates and other temperatures and more than 150 different probes.
The 396 series allows for a wide temperature range, with F/C switchable and accurate [+ or -]1%.
Sealed film switch.
One to three nine-
V battery, 500 hours of continuous operation per battery.
All instruments have J, K and T-type thermocouple.
Probe includes 1/8-in. diam. , 4-in-
Long needle probe for insertion/immersion; micro-
3/16 needle probe-in. -
Long tip of elastic mold;
And surface probes with ceramic
Straight or 90 [degrees]
Shaft for mold, barrel and platform. BARBER-COLMAN CO.
See European control
Budget supply Limited
Temperature Monitors include non-contact infrared devices and ATkins handheld devices
Probe with thermocouple.
Recording models are available.
Temperature control includes no indication to close-
Fuji PYZ series and PYX fuzzy series-logic series.
Extruder and mold temperature controller series-
Temperature Controller for PID control that requires heating and cooling.
Type 9900 provides manual coverage for the operation when the sensor fails.
Protect unattended devices from other features that are damaged by a single deviceor muliple-
Cycle element failures include LBA (loop-break-alarm)
And lock alarm
Simple renovation and high cost
1/4 effective-and 1/8-
Custom Panel adapter for DIN.
Model 3200 (limited control panel space)1/32-DIN)
With automatic tuning PID and power source and input.
Temperature, process and time/temperature bracket-
Separate controls can be fully configured via a temporary computer link-up.
In addition, the series of thermocouple sensors compatible with the controller.
Emerson Electric Limited
Inventory or custom control products include 1600 series compact, reliable 1/16-DIN field-
Easy-to-install configurable controls with smart self
Adjust the fuzzy logic function and combine the hot/cold control function. The 1/4-
DIN 2104 temperature/process controller is a high
Loop device for temperature, flow rate and pressure.
And liquid level control applications.
Features include nema4x with separate panel
PID control (
Single output or hot/cold), and control-
Alarm for loop protection. Optional five-
Control the output, alarm or event output and digital communication of RS232 or RS422/485. The 1/4-
The DIN 3101 high/low limit controller is compact and fully programmable.
Provides user programmable input, output, and high/low limit functions such as total time for temperature display and peak process variable display.
Flexible for most limit control applications as well as the listing of UL and CUL.
The 4115 solid-
State power controller is single
Rod, always open-
Accept any 3-exchange equipment
32 VDC controls the input signal and provides on/off zero-cross-
120 to 480 VAC load switching from 40 to 90 amps.
Immune drive circuit with longer life and higher load capacity than triacs.
The temperature control range ranges from simple non-indicating types to numbers with PID self-tuning.
The concept engineering labeling R non-contact temperature sensor for slender objects is mainly used to measure the temperature of metal conductors during wire insulation extrusion.
Produce millivolt output.
Control King CompanySee Hot-
From handheld devices to digital terminal devicesheld to panel-
Installation instrument with alarm function and accuracy [+ or -]2[degrees]F.
The probe can be extended to 1000. Hand-held and panel-
Installed digital thermocouple unit from-40 F to 2200 F.
The probe can extend to 50 feet. A range of 1-and 2-in. stainless-
Steel bimetal thermometer with different pole lengths, 2-, 2 1/2-and 3 1/2-in. vapor-tension remote-
Read the thermometer.
Chromium magnetic, Inc.
The electric heater monitoring product series includes a current loop indicator for monitoring the operation of the electrical heater elements in the forming machine.
Connected to the wire leading to the heater element, they provide visual LED lighting when the current is present.
The indicator works directly at the moment-
Carry wires or in remote locations. DAVIS-STANDARD CORP.
Patented dual HES temperature controller
Thermpocouple design maintains precise control during critical processes.
One thermocouple is located in the heater/cooler and the other in the deepest part of the barrel, corrective heating or cooling measures can be taken to quickly and automatically stabilize the surface temperature of the inner barrel.
The recipe function reduces the amount of scrap made during start-ups and grade changes. D-M-E CO. See Hot-
The temperature sensor production line of Durex industries.
Standard and custom designs are available for all thermocouple types and platinum RTDs.
Standard design of equipment in Europe and Japan.
Large stock for immediate shipment.
East Coast sensors
Thermocouple in all ANSI calibration (
J, K, T, Type E)
Using stainless steel and Inconel sheath materials, ground/ungrounded and exposed connections are provided in a variety of probe configurations.
Electronic Development Laboratory Co. , Ltd. Temperature-
Includes manual indication, control and recording of instruments
Handheld Digital and Analog thermometers, infrared thermometers, multi-sensors, scanners and controllers.
As of 2000 F, the thermocouple sensor can be used to measure mold surface, sub-surface, liquid, melt and air jet with fast response speed and near 1 F accuracy
Hands do not touch
The handheld infrared thermometer is measured from 0 to 1600 F/C and the quich reading is shown as 0.
1f resolution on LCD.
The display shows the lowest, highest, difference, and average temperature.
High/Low sound alarms are given.
Adjustable radiation rate.
Temperature controllers with various functional features and configurable degrees.
All controllers are self-contained
Tuning algorithms and advanced over-impulse suppression.
14 fixed Series 2000 controllers and programmers-
Build or modular models and four sizes from 1/32-to 1/4-DIN.
All models have a common look and feel, intuitive and easy to use, easy to configure, in line with CE and UL international standards.
Many models offer customized linearity and optional Modbus, Profitbus, or device enet communications. The 1/8-
Suitable for extrusion DIN type 2208e with built-in
In the manual station, the dual display and output of water, air, oil cooling, alarm, load current display, communication and advanced algorithm. Full-featured 1/4-
The DIN 40e model adds advanced features such as analog retransmission, remote input, and adaptive tuning.
The controller is supplemented by a full range of solids-
State contactor and scr power controller for industrial heating applications.
Everest Science CompanyModel 3000.
32 H infrared temperature sensor available-22 F to 2000 F.
The response time is as low as 20 ms.
Stainless steel sensorsteel case.
Stainless steel connectors.
Optics are aerospace.
Quality, highly durable, double
Zinc selenium coating.
With its compact design (0. 625-in. diam. x 2. 25-in. long)
, No manual cooling, the instrument can withstand working environment up to 160 F.
The signal adjustment is done by an additional type 600 linear filter, which provides an RS-
In addition to the analog output, 23 C signals are provided.
The software allows to change settings from PC.
Various outputs are available.
American company of EWIKON hot runner system. See Hot-
Runner component. EXERGEN CORP.
The contactless infrared temperature sensor includes an IRt/c sensor that does not require a power supply and does not have moving parts.
No maintenance required to operate in harsh/harsh environments.
The unit design meets any requirements and there are more than 300 models that can fit in any form or shape.
The IRt/c sensor provides complete, compact, and economical
Alternative purpose of temperature measurement.
The unit acts as a complete system at a wide target and ambient temperature, providing multiple linear output options. DX-
The handheld infrared thermometer range is a traceable, affordable, and expensive NIST range of products.
Free micro scanner.
The patent automatic radiation compensation system is designed (AECS)
It created its own black body,
Free temperature reading.
Temperature/process controllers and indicators include VT series 1/16-DIN (48VT)and 1/4-DIN (96VT)
Self-tuning PID controller. Dual four-
Digital LED display of set points and process variables.
The input includes the thermocouple, thermal resistance, current and voltage. One-
The Touch Auto-Tuning function automatically calculates the best PID value.
Can also be used for on/off control.
Control action 5A relay, 4-
20 mA current or pulse 24-
VDC driving solid-state relay. User-
Choose to heat or cool. Five-
The Amp alarm relay outputs the standard on both models and two on the 96VT.
Other units including 1/16-, 1/8-and 1/4-
DIN temperature controller with analog or digital setting point and on/off or proportional control.
Temperature Indicators include ultra-small and 1/8-
DIN and temperature indicators and controllers with digital setting points.
Indicators include up to 4-in. displays, 1/8-
DIN and micro version for thermocouple and RTD input.
Options include mV or 4-
Current output of 20 mA.
Switch boxes and multi-point scanners for up to 10 locations can be monitored.
FAST HEAT, INC.
Conductor series microprocessor
Temperature controller based on field interchange 15-and 30-amp modules.
The standard host includes single, five, nine and twelve districts.
Free of charge by combining mainframes or custom, up to 128 zones can be configured
Standing control system.
Features include three
Function LED display, double
Function Digital Group-
Point, complete diagnosis and automatic for each areasoft as-needed warm-
Up mode, detect the amount of ground faults present on each heater area.
The electrical configuration includes a standard 240 VAC (optional 120), single-or three-
Phase, 50 to 60Hz.
Includes a full set of thermocouple for all common ISA types such as J, K, and T, as well as special alloys for applications requiring up to 4200 F.
Temperature control includes electronic or mechanical (differential-
Expansion, card or liquid-expansion)
Type: Not indicated or represented by numbers (LCD/LED)
Or analog display;
Small or standard size; surface-
Installation or probe style;
And models of normal or harsh environments.
Sensors include thermal resistors for local or remote sensing. Microprocessor-
DIN controller based on automatic tuning and fuzzy logic.
Analog and microprocessor board
Based on temperature and limit control.
Certified by ISO 9001.
\"Smart\" infrared path-thermal profile SLS
Real-time scanning system
Time inspection, monitoring and control of moving networks and rotating elements during continuous processes.
Designed for continuous operation in harsh environments, the equipment can be used as a stand
Separate monitoring or partial shutdown-loop process-control system.
Thermovision infrared imaging and thermal analysis systems are used for plant maintenance, R & D, product design and quality assurance. FLO-TECH DIV.
Rated RTD thermometer probes are precision platinum units with max.
300 F and maximum temperature ratings.
The pressure rating is 7500 psi.
Can be inserted directly into the hydraulic or fluid material and provide 3-sec response. The 1/8-
The non-proliferation treaty subject thread eliminates the need for special fittings with insert lengths ranging from 1 to 3 in. DTM-100 panel-
Amount temperature reading 3/4-in.
The LCD display is visible in ambient lighting. A high-
Impact plastic housing bracket is 1/4-DIN. Standard 0-
The rear terminal has 10 recorder outputs.
No internal modifications are required and can be wired for 120 or 240 v, 50 or 60Hz. GAMMAFLUX, L. P. See Hot-
GIC thermodynamics In-
Stock line for thermocouple, RTDs and thermal resistor. Melt-Bolts and springs
Design for loading with leads, accessories and connectors. HARREL, INC. Three-
Electronic Temperature control including Plugin, single-
Model-based, coupled with compact multi-area unit lines, panels-mounted, 16-and 32-zone modules.
With 30-30 for remote installation, capacity can be extended to any number of areas
Channel assist module running under panel supervision-mounted unit.
For extrusion, both single
A multi-region model can use a patented Duosense system that uses deepand a shallow-
Good temperature sensor with faster response speed and longer life without sacrificing depth accuracywell sensing.
There are also adjustable RTD temperature sensors for extrusion and injection molding machines.
Full range of temperature controllers for hot runner systems.
Spiral instruments at Bristol BABCOCK
Temperature/pressure gauge includes 3 1/2-full line, 4 1/2-, 6-, and 8 1/2-in.
Gauge with exclusive CAM and roller movement, as well as optional grease fittings for extruder applications.
There are also digital gauges of several sizes.
Full line of 3-and 5-in.
Tonnage dial that can be used for injection applications.
Husky Injection Molding System Co. , Ltd. See Hot-
Hot runner element Wanbang Instrument Co. , Ltd.
Digital Temperature Indicators, controllers and alarms include portable digital thermometers and displays that are permanently installed.
Robust portable production lines include a large number of general-purpose products
Purpose and professional discussion.
Permanently Installed instruments include microprocessor
Based on digital panel meters, various digital temperature indicators and industrial temperatures-alarm panels.
In addition, the temperature alarm/controller series has optional digital indication of temperature, setting points, and difference. IMS CO. Closed-
Loop modular temperature controller with rated temperature of 15 am ps and 120 or 240 v
Proportional power, automatic soft
Start and digital display. Stand-alone closed-
Loop temperature controller with rated temperature of 15 am ps and 240 v, stored at 1-, 2-and 4-zone models. Stand-alone open-
Loop voltage controller with rated voltage of 5 or 15 am ps, 120 or 240 v
Equipment that reads heat directly-
Type 8010 temperature indicator with LED display and 1/8-
DIN case and heat retrofit
Melt the thermocouple. High-
Low temperature alarms and monitors have adjustable high and low setting points indicating temperature of any type-
J thermocouple, a visual and audio alarm is triggered if the temperature is above or below the set value. Panel-
Tining PID controller in size 1/4-, 1/8-and 1/16-
DIN is also in stockHand-
Keep the surface thermometer reading temperatures up to 500 F without touching the heat source. Also low-
Cost K-type digital unit for temperature to 1999INCOE CORP. See Hot-
Runner component. IRCON, INC.
Non-contact infrared thermometer works in harsh environments50 to 6500 F. On-
Line thermometer, line-
Imaging System, portable contactless thermometer and lowcost two-
The sensor \"sees\" objects as small as 0. 012 in.
And reply within 25 milliseconds.
Series 43 and 48, run at 3.
43 microns and 7.
95 microns, respectively, best for polyethylene and polyester film.
JEWELL electrical instruments Co. , Ltd.
Analog panel instruments for temperature monitoring and control.
Type 400 indicates that the temperature controller has a double set value, 4. 5-in.
Mirror scale and relay output.
Can be replaced directly in most devices.
The option allows customization.
The designed thermocouple and RTDs include bayonet, plastic meltingbotl, flex-
Adjustable armor, spring-
Adjustable depth thermocouple.
In addition, calibration equipment and services, interface hardware related to sensor applications, and an integrated combination of signal transmitters or sensors with transmitters. J-
Hot runner Technology Co. , Ltd.
Supply MCS temperature-
The control system with a touch screen display ranges from 1 to 240 areas.
KERNCO Instruments Limited, INC.
More than 60 analog and digital thermometers include thermometers with stainless steel
Steel and straight stem; panel-
Install instruments and transmitters with J, K, T and E-type thermocouple probes; strip-
Charts and circular Temperature recorders;
Infrared instruments for non-contract measurement (
Portable and remote models with 4-20 mA output);
Multi-channel, 4-20 mA or 0-
5 VDC temperature monitor with alarm system.
KIEFEL Technology Co. , Ltd.
Temperature control unit for heating or cooling of tools and machine parts. Closed-loop design.
Land infrared land instrument International Co. , Ltd.
Minolta/Land portable Cyclops 343 and Cyclops 379 hands-
Accurate positioning of handheld infrared thermometer
Temperature measurement on film
Film plastic in the measurement range of 30 to 700 degrees Fahrenheit
Features include digital display of focusing optics and temperature;
The choice of peak hold, Valley hold, or continuous operation; and built-
When calculating the maximum, minimum, or average value of a series of readings.
Portable and on-
The line contactless infrared thermometer has a narrow band spectral response and is suitable for non-contact temperature measurement of hydrocarbon polymers.
New System 4 M7 on-
Line thermometer measurement
Speed Response from 75 to 700 F
Company of SAFETYTEK.
Non-contact infrared sensors provide continuous temperature measurements for moving, fragile or unsafe targets without product contamination.
Measurement range of fixed and portable devices from-70 F to 3000 F. MX-
High range of fixed equipment
The reading is accurate to the resolution optics [+ or -]
1% milliseconds per 300MX-
HT is suitable for extremely demanding industrial applications with temperatures up to 3000 degrees Fahrenheit
The View ratio can be 50: 1 ir 75: 1. MX and MX-
HT provides R-Type, S-type and B-type thermocouple, one mv /[degree], 0-5 v, 4-20 and 0-20 mA, and RS-232 and RS-
Serial Output 485. Portable LTL-
100 provides laser aiming for accurate non-contact temperature measurement.
Features include 1-
Sec response time, peak hold time, and 8-
14 micron spectral filter with temperature range-20 F to 2000 F. C-
1000 portable self
The operating equipment consists of a probe and a display unit.
Love control DIV
Dwyer Instruments Co. , Ltd.
Temperature control, sensors, and output devices include a full set of controls for the four most common sizes: 1/32-DIN, 1/16-DIN, 1/8-DIN, 1/4-DIN.
Each is compatible with the plug and offers from simple control to automatic/manual, self
Tuning, ramp/soak, computer communication, and fuzzy logic.
Most controls have IP66 (NEMA 4X)
Front panel rating and approved by UL, CE and CSA.
Model 4151 and model 4130 transmitter modules are available for users
Programmable input and isolated linear process output (0-10 VDC or 4-20 ADC).
Model 4380 Iso/Verter II accepts any standard process signal, isolate it and re-transmit it as samw or any other standard process output.
New 1090, 1290 and 1490 alarm acceptance process, thermocouple or RTD input.
All modules are UL certified.
Standard and custom thermocouple, RTDs and thermal resistance probes.
Output equipment includes solid mercury displacement contactor
Solid state relay-
State contactor and scr power control.
Capacity from 10 to 150 amps.
Zero available SCR control
Cross or phase
Angular fire configuration. LUXTRON CORP. Luxtron fiber-
Optical temperature sensors and instruments can be measured in difficult places and provide immunity to internal safety.
Marin manufacturing sensors include adjustable bayonet
Installed melting and nozzle thermocouple.
Special thermocouple for surface
Temperature and band
Heater induction is provided.
Design will be customized.
Melt design company. See Hot-
Portable, handheld and battery compact M7-
The operating non-contact infrared thermometer has an LCD temperature display function with a dual laser aiming function for targeting small target areas.
It is used for the maintenance application of measuring the temperature of motor, bearing, steam trap and insulation void. MOLD-MASTERS LTD. See Hot-
Runner component. NANMAC CORP.
Type temperature sensors for molding and extrusion measurement include A6A series springs-Bayonet.
Measurement of in-style ribbon thermocouple
Wall temperature of barrel
The real local temperature in the metal wall can be measured and not affected by the conduction errors caused by external air flow, mounting fixtures and metal protective tubes.
The C4 series thermocouple measures the temperature in the mold cavity with millesecond response time.
A type that measures the temperature of the part when it is formed.
Another way to measure the temperature of the inner surface of the wall.
They are all installed in existing top rod holes and used as thermocouple and top rod.
When the material flows through the extruder nozzle, the temperature is measured by the 8 series thermocouple.
Millisecond response time
Run continuously or in a loop.
There are also traditional temperature sensors, controllers and indicators.
SP series melt-
Low temperature sensor
Volumetric capillary system to ensure thermal stability while minimizing the risk of melting contamination.
Rapid response makes the equipment less vulnerable to flow erosion. Models 500 (1/16-DIN)and 1000 (1/8-DIN)single-
The cycle temperature controller has a dual LED display to view the process and set values at the same time.
Units that provide relay, logic, or triac Control output. Models 3300 (1/8-DIN)and 4300 (1/4-DIN)
The controller is equipped with backlight and multi-function LCD display; data-
Acquisition rate of 6 samples/second;
And digital communication capabilities.
The relay, logic, analog or electric actuator control output can be provided.
Model 1020 1/8-DIN two-
Ring temperature controller with AC module
The splash-proof panel accepts two separate inputs.
Model 100,200,201 panel meter/alarm unit, 1/16-and 1/8-
Fully configurable DIN.
Model 201 features 3 1/2-digit, 14-mm display;
And Model 100, a 3-digit, 14-mm display;
And model 200, a 3-digit, 20-mm display.
Four operating software levels that can only be accessed by entering code. NORAL INC.
Complete Series of thermocouple, RTDs and thermal resistance probes.
Specialty is custom manufacturing and application problem-solving.
The patented probe includes a \"retractable\" molten thermocouple that allows immersion and removal from the plastic melt stream during operation. Also bayonet-style, nozzle-
Type and compression
Parts version of injection molding machine and extruder. Two and three-
Pin thermocouple connectors, mounting adapters, and accessories are also available. OGDEN MFG. CO. ETR-3200 1/32-
DIN temperature control with intelligent logic can make control decisions based on fuzzy or incomplete information.
It is said that due to process interference, the initial overshoot and deviation from the set point are almost eliminated. ETR-
3200 can be configured with PID self-tuning control with multiple output options.
A second output can be selected from optional features including alarm.
With universal input, ETR-
3200 various sensors or other input sources can be accepted.
The parameters are optional on the front panel and are easy to install. RS-
The 485 output allows multiple controls to be networked remotely with the PC. ETR-9200 1/16-
The automatic setting of PID parameters based on temperature control has more intelligent logic.
Decision of Smater Logic when process interference is detected-
The Making function quickly returns the process value to setpoint. Menu-
The driver provides configurable process parameters such as universal input functions and C or F display.
Front panel, double display, ramp-to-
Two selectable set points
Function secondary output and RS-
485 communication output is a function. ETR-4220 1/4-
Automatic tuning based on temperature control also has more intelligent logic. Menu-
The driver provides configurable parameters such as universal input and C or F display.
Process and set point temperature in double, four-digit display.
When the power is turned off, the non-volatile memory retains the process parameters. Two selectable-
The function secondary output allows high, low limits or alarms. ETR-
For processes that require cooling, the 4230 has an additional proportional output. RS-
485 communication available. ETR-8120 1/8-
Temperature control based on automatic tuning has pre-function
Configurable control parameters for the panel. The 1/2-in.
Both the akes process and the set point are always visible.
Optional parameters include Input type, C or F Display, control mode, and heating or cooling, and two secondary outputs provide optional functions or limitations. ETR-
8130 has an additional proportional output for cooling.
Omega Engineering Limited
Omega Technology Limited
Temperature Controller and monitor including thermocouple, RTD and infrared sensor.
Can be controlled by simple on/off or PID, automatic tuning, event-select controller
Signal generation and ramp/soak programming. Single-
The multi-loop controller is independentalone or panel-mounted.
Extended warranty and custom works are provided.
Omron Electronics Co. , Ltd.
Industrial Automation Systems Division
The electronic process/temperature controller has the functions of automatic adjustment, PID and communication.
Size includes 1/4-, 1/8-, 1/16-and 1/32-DIN. New E5-
The N series digital temperature control includes communication and advanced self-control
Adjust the function to the compact case. Flexible E5-
For security purposes, the K-series ofers has seven security levels and several methods for operating variables, including errors and alerts.
All options including transfer output (4-20mA)
Interchanged and easy to operate on site with event inputreplaceable.
See the hot spot of rice con control technology-
Oven Industry Limited
Electronic temperature control and sensors for various process applications.
Control ranges from simple on/off and scale types to complex micro-controllers-
Specially customized controller.
A-based on power control and contractor control-c and d-
C adjust the power of the electric heating.
Series A Type 11
C contactor, replacement of mechanical and electrical contactor and Mercury relay, available in single-phase or three-
The phase version is 600 VAC at all standard voltages, with dimensions ranging from 10 amps to 1200 amps/phase.
All units are tested and run up to 600 times/min, running more than 0. 2 billion times in a row without component failure.
Used with on/off temperature controller. Single-and three-phase a-c variable-
At all standard voltages up to 1200 VAC, an electric heating ratio control voltage control of 10 to 600 amps/phase is available.
The 18-series controls are available in both stages-angle or zero-fired versions.
Can be operated manually, can also be equipped with analog milli-amp or d-
C voltage signal from the temperature controller or PLC.
Series 36 d-
C. Power Control acceptance formor three-phase a-
C voltage input with variable d-c output.
600 VAC is available at all standard voltages.
Dimensions from 10 to 1200 amps/phase series 18A thermocouple temperature controller interface with 18 or 36 series proportional control to provide closure-loop control. Either full-
Scale indication or temperature-
Can be set for various temperature ranges and thermocouple types.
Plastic Engineering Technology Service Co. , Ltd. See Hot-
Plastic Processing Equipment Co. , Ltd.
Thermocouple, RTDs, temperature indicator, calibration and controller.
Thermocouple includes Type J and Type K adjustable depth, OEM replacement, washer type, shovel type, melting-botl, hose-clamp, and hot-melt.
Indicators include panels-mount and hand-
Handheld portable model.
Full range probes for manualheld models.
Controls include open-loop, solid-
The state power supply control range is from 8A to 20.
Electronic temperature control in 1/4-, 1/8-, and 1/16-
From the hustle and bustle of Volo and Athena, and the heat
Runners are controlled at 15A and 30. POLYSHOT CORP. See Hot-
Power PROCESS controls digital PROCESS controllers, PROCESS monitors, PROCESS programmers, and automatic/manual stations. Single-
Control the loop controller and monitor of the independent loop or the whole factory.
Instrument in 1/8-and 1/4-DIN sizes.
Thermocouple and RTD temperature sensors include fixed and adjustable immersion, ring, nozzle, melting-
Bolt type and special structure.
The same is true for connectors, temperature indicators, sensor selector switches, bayonet adapters, thermocouple leads, connection heads, and transmitters. QUANTEM CORP. Sub-panel or panel-
Installation of electronic thermostats and indicators includes potentiometer and scale calibrated according to specifications.
Various input voltages, output devices and control modes. Microprocessor-
Digital setting points and indications are provided based on the digital thermostat, as well as programmable up and down setting points and indications.
Standard and custom thermal resistors, RTDs, and thermocouple. RAYTEK CORP.
Non-contact infrared temperature-
The measuring sensor includes an on-line point sensor and an on-line wrench for monitoring the temperature in the process of a continuous network.
There is also a portable infrared thermometer.
The Thermalert MP50 infrared process camera provides crossover
Machine temperature measurement.
DataTemp MP Windows 95 and NT software display real-time temperature distribution and graphics
Time monitoring. The 3.
43 linetrans is specially designed to measure thin polyethylene, while 7.
9 for acrylic, acetate, nylon, PVC and polyester.
The Thermalert MI and GP models feature independent point sensing heads and electronic devices.
Thermalert CI and TX models combine sensors and output electronics in an integrated package.
CI is a suitable thermocouple replacement, TX is a smart sensor with simple dual-
Wire Installation and two-
Mode of communication.
Two introduced systems were specially designed for on-line analysis of extrusion processes.
ES100 system analyzes Bolt temperature by scanning castings
Film and film Network.
The EC100 system scans the surface temperature of the melt curtain in the extrusion coating and lamination.
The TF100 system allows thermoformers to visualize the temperature distribution of the entire paper. RDF CORP.
Micro foil heating
The nominal sensitivity of the flow sensor is 0.
02 to 11 V/Btu /[ft. sup. 2]-
Hr with maximum heat-
Flux ratings for 20 to 30 Btu /[ft. sup. 2]-sec.
Sensor with integral thermocouple. Hypodermic-
Needle thermocouple sensor model HN, measuring the internal temperature of soft or half
Solid objects with minimal puncture area. Diam.
The size of the needle can be 0. 020 in.
Model 2900 two-
The wire RTD temperature transmitter is accurate 【+ or -]0. 1% of span or [+ or -]0. 1[degree]
C, whichever is larger.
Designed for rugged industrial applications where operating temperature allows the transmitter to be mounted directly to the sensor connection head.
Complete Series of RKC instrumentsto-
Temperature and process controller are used.
Discrete controller with active function
Tuning using advanced PID algorithms to suppress and eliminate overtuning at startup
Up, process upsets or setpoint changes;
Digital communication, field programmable heaters, and Loop Interrupt alarms.
Ramp/soak programmer in three DIN sizes can program in 16 to 256 steps.
Multi-loop control is different from dual looploop panel-
The control is installed on a multi-zone modular controller with a maximum of 320 temperature zones controlled per operator interface.
Digital communications include mini-
SCADA programs and software tools for customization
The operator screen, the Profibus, Modbus or device enet protocol, and the RKC software program are designed to interface with the plc without additional programming.
Suitable for handling temperature control loop with PLC system or bracket
Separate control system
Related products include power controller, sensor, led ssr relay, high limit controller and indicator.
There are three instruments.
Warranty, UL certification, CSA, CE marking, CC-Link and C-Tick approvals.
ISO 9001 certification.
Service construction instrument Department
Thermometers and sensors for temperature measurement include temperature ranges from-150 to 2000 F.
The sensor is suitable for surface, melting and soaking as well as oven and free air applications.
Synchronous forming solution SP2100 temperature controller adopts \"soft pulse\" technology to achieve accurate continuous power flow without power onagain/ off-
Outbreak again, thereby reducing the pressure of the heating element and providing more accurate temperature control.
Two operating interfaces are provided: full color graphics card, 486-
Based on the operator interface;
Or a small LCD operating interface.
Tianke Electric Heater Company
From simple analog controllers to sophisticated microprocessor, the complete range of temperature controls covers all requirements
A unit based on multiple programmable outputs and universal inputs.
Size includes 1/32-, 1/16-, 1/8-, 3/16-and 1/4-DIN controls.
Most controls have UL, cUL, CSA, or CE approval. Models TEC-4300, TEC-8300, TEC-9300 and TEC-
2500 self-tuning control with universal sensor input, fast sampling rate, fuzzy logic PID, 2-
4 separate programmable outputs/alarms, universal power inputs, heater interrupt alarms, trouble-free transmission to manual mode, analog reissue, and Japanese 4 X/165 front. Model TEC-
TEC-4100 m TEC71008100 and TEC-
9100 4 x/4 with universal sensor input, fast sampling rate, fuzzy logic PID self-tuning control, 6 different outputs, universal power input, trouble-free manual mode transfer and film-compliant/Models TEC-940 (panel mount), TEC-920, TEC-910 and TEC-
The 220 features universal sensor input, fast sampling rate, fuzzy logic PID self-tuning control, 6 different outputs, universal power input, manual mode, and a Japanese 4X/ip65face.
Simulation Control technology of economy
905, 902, 901, 805, 704, 405, 404, 402, 401 and with digital display, inclination meter, thermocouple and RTD sensor input, Button and potentiometer setting point, multi-output and PID or on/Off control.
It\'s also a complete series.
Home sensors including standard thermocouple and RTD components.
The thermocouple type includes Ansi calibration and RTDs include standard DIN and JIS-
100 1000 ohm standard curve.
The assembly method includes adjustable and fixed bayonet, nozzle, ring, various fixed and adjustable fuse bolts and minerals insulated from the connection head. TESTCO INC. Temperature-
From basic digital pocket thermometers to manual measuring instruments
Multi-functional units are held.
Various probes for surface, immersion, air, infrared or penetration applications.
The instrument uses Type K, Type J, type NTC or type RTD sensors300 F to 2490 F. Quartz-
Sensor thermometer with [accuracy [+ or -]0. 2 F. Dual-
Temperature input allows differential temperature reading of [accuracy]+ or -]0. 06 F.
Professional-level instruments offer split display, analog output, dual probe input, max/min/hold, and optional recorder modules for recording and printing.
The PC interface allows real-time data transfer. TEXMATE INC. Offers 1/16-, 1/8-and 1/4-
DIN temperature controller with rs23c and RS485 serial interface, multi-ring KR4 unit and supporting RTD and thermocouple indicators.
Thermal power company, INC.
Thermocouple, RTDs and temperature controller for all types of extrusion molding.
Wide range of standard bayonet and melt
Flow thermocouple and RTD components and hardware. Also custom-made systems.
The temperature controller model has 1/4-, 1/8-and 1/16-DIN cut-
Out size with thermocouple, RTD and process input.
Optional features include RS-
232 communication, analog output, and alarms.
Thermoworks inc. Hand-held and panel-
Install the thermometer and probe.
The thermocouple type is used for penetration, liquid melting, and rapid surface measurement.
Precision RTD thermometers for key applications and inspection of other meters and controls.
A few Mini (1/32-and 1/16-DIN)
The panel control has a microprocessor.
Infrared contactless thermometers are also available.
Total Temperature Instrument Co. , Ltd.
Fuji Electric series PYX, PX, PVX blur-
Logic temperature controller.
The PYX series controller 1/16-, 1/8-and 1/4-
DIN size, no overtone or no overtone at startupup.
485 communication, monitoring software, loop-
Tasks and 8-
Segmented programmer for ramp/soak.
PX series has standard Japanese standard
4 X rated panel.
Accept all kinds of input and 8-
Programming for segmented slopes/immersion.
Advanced security options prevent unauthorized use and display all parameters-maskable.
Standard power supply from 85 to 264 vac with 24 vac/dc option.
Two outputs and programmable alarms are available. Comes in 1/4-to 1/32-
8-DIN sizeor 3-
Key programming keys on the panel. PVX high-
High performance programmable controller with free window-
Loader-based software can store nine modes of up to 20 clips with its own recipes.
Features include guaranteed soaking function, 100 Ms sampling rate, triple simultaneous display, various input and output selections, automatic/manual control, four external command input points and Mode Select inputs.
United Electrical Control Company
Indication and recording of temperature control, thermocouple and RTDs. Explosion-
Proof and general-
Use of temperature and pressure switches, hot track/freeze protection thermostats and pressure transmitters.
VAS Engineering Company
Doric instruments model 473 thermocouple digital calibration/indicator simulation and measurement of thermocouple, Ohm, ML-Amps and milli-volts.
Calibrate the temperature controller, indicator, recorder and transmitter.
Long battery life, manual
Versatility, high/low memory and big touch-type switches.
Models 460 and 461 measure and display the temperature.
The input type is selected on the front panel.
Waken Electric Power Company
Temperature control, control panels and sensors include programmable controllers as well as models of bulbs and capillary tubes.
UL is listed on the control panel.
Sensor products include thermocouple and RTDs. In-
Stock and custom products.
The WATLOW standard and custom control Div.
Provide controls and indicators in 1/2, 1/4-, 1/8-and 1/16-DIN, in open-
Plate, sealed, potted4 versions.
Thermocouple, RTD, and process input. Solid-
State, switch d-
Mechanical relays and process outputs. RS-422/423 and EIA-485 serial-
Agency approvals include UL, FM, FDA, CSA, AGA, TUV, VDE and MIL-STD.
Calibration Curves for DIN and JIS. Also mercury-
Displacement relay (MDRs)
Infrared sensors and solids-
State power control (scrs).
Watlows Anafaze manufacturing more
Temperature controllers, machine control products and computers-
Based on control software.
Provides advanced serial interfaces for computer monitoring and data recording.
The PID control is optimized by automatic adjustment of expert system, so as to evaluate the running ability of the machine.
ANAWIN, Windows 95-
Software packages allow users to configure, monitor and maintain critical processes. A 32-
The Bit operating system brings a high degree of stability to various Watlow controllers.
Watlow anafaze, INC.
Multi-loop PID controller in 1/4-4 to 48 channelsand 1/8-DIN through-panel and sub-
Panel installation configuration.
The system includes a temperature controller with ModBus and device enet, as well as a user-
Programmable logic and highlevel software.
The Line infrared thermometer provides non-contact temperature measurements of plastic films, other plastic extrusion, coatings and molded parts.
Difficult temperature measurement, for example, on a tenter frame of a very thin film, using a precise narrow-
This technology enables the device to measure the surface temperature of the film without passing through the film or without being affected by the background.
Monitor and control temperature during infrared or thermal heating
By measuring the temperature of the product itself, rather than measuring the temperature of the air or heater, the air furnace is possible. YOKOGAWA CORP.
New green Series Universal single in the United States
Cycle Control provides 1/8-or 1/4-
DIN size for single or hot/cold general version.
Heater-unit with programmable input and output type
Interrupt alarm, set complete PID for each heating and cooling output and tune automatically.
4-New UT2000 multi-area control-or eight-
The loop module has programmable input and output types to automatically tune to the fast connection of the touch screen
Line Display for PC or PLC.
All Green and UT controllers have a super control algorithm that uses fuzzy logic to simulate the operation of an expert operator.