Pin No. | Symbol | Description |
1 | U/D | Up/down scan setting. |
When U/D=H, reverse scan. | ||
When U/D=L, normal scan | ||
2 | NC | No connection |
3 | HSYNC | Horizontal sync input in digital RGB and CCIR601 mode. |
(Short to GND if not used) | ||
4~6 | VLED | Power supply for BLU LDO circuit |
7 | VCC | Power supply |
8 | VSYNC | Vertical sync input in digital RGB and CCIR601 mode. |
(Short to GND if not used) | ||
9 | DE | Input data enable control. When DE mode, active High to enable data input. |
Default pull low | ||
10 | NC(X2) | No connection.(Touch panel control PIN: X2) |
11 | NC(Y1) | No connection.(Touch panel control PIN: Y1) |
12 | ADJ | Chip Enable (Active High) |
13~15 | B5~B3 | Blue data input |
16 | VSS | Power ground. |
17~19 | B2~B0 | Blue data input |
20 | VSS | Power ground. |
21~23 | G5~G3 | Green data input |
24 | VSS | Power ground. |
25~27 | G2~G0 | Green data input |
28 | VSS | Power ground. |
29~31 | R5~R3 | Red data input |
32 | VSS | Power ground. |
33~35 | R2~R0 | Red data input |
36 | NC(X1) | No connection.(Touch panel control PIN: X1) |
37 | NC(Y2) | No connection.(Touch panel control PIN: Y2) |
38 | DCLK | Clock signal. Latching data at the rising edge |
39 | VSS | Power ground |
40 | L/R | The shift direction of device internal shift register is controlled by this pin |
as shown below: | ||
L/R=H: STH->SO1->• • •->SO960->STHO | ||
L/R=L: STH->SO960->• • •->SO1->STHO |
Item | Symbol | Min | Typ | Max | Unit | |
Operating Temperature | TOP | -20 | 70 | ℃ | ||
Storage Temperature | TST | -30 | 80 | ℃ |
Item | Symbol | Condition | Min | Typ | Max | Unit |
Input Power | VCC | 2.7 | 3.3 | 3.6 | V | |
Current for LED Backlight | IL | 140 | mA |
RELATED PRODUCTS
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
PRODUCT MESSAGE