Custom Lcd With Touch Screen Module Manufacturer in China

这里可以自定义设置

DESCRIPTION

LM028CQ04NS-DR01 is a 2.8 inch TFT LCD Display with resistive touch.The model is featured with MCU and RGB interface; This 2.8 TFT Touch Screen Module can be used in embedded systems, POS，industrial device, security and hand-held equipment which require display in high quality and colorful image.

DRAWING

LCM Mechanical Diagram

SPECIFICATIONS

Pin No.	Symbol	Description
1	LED_K1	Cathode of LED back light.
2	LED_K2	Cathode of LED back light.
3	LED_K3	Cathode of LED back light.
4	LED_K4	Cathode of LED back light.
5	LED_A	Anode of LED back light.
6	IM0	Note
7	IM1	Note
8	IM2	Note
9	IM3	Note
10	RESET	reset pin. .Initializes the ILI9341V with a low input. Be sure to execute a power-on reset after supplying power.
11	VSRNC	Vertical sync signal
12	HSYNC	Horizontal sync signal
13	DOTCLK	Anode of LED back light. .
14	ENABLE	Display enable pin
15	DB17	Data bus
16	DB16	Data bus
17	DB15	Data bus
18	DB14	Data bus
19	DB13	Data bus
20	DB12	Data bus
21	DB11	Data bus
22	DB10	Data bus
23	DB9	Data bus
24	DB8	Data bus
25	DB7	Data bus
26	DB6	Data bus
27	DB5	Data bus
28	DB4	Data bus
29	DB3	Data bus
30	DB2	Data bus
31	DB1	Data bus
32	DB0	Data bus
33	SDO	Serial data output
34	SDI	Serial data input
35	RD	Read data signal
36	WR	A write strobe signal and enables an operation to write data when the signal is slow.
37	RS	A register select signal.Low:select an index or status register, High: select a control regis
38	cs	A chip select signal.Low:the ILI9341V is selected and accessible.High:the ILI9341V is not selected and not accessible
39	FMARK	Tearing effective signal control
40	IOVCC	Power supply for logic voltage.
41	VCI	Power supply for analog voltage.
42	VCI	Power supply for analog voltage.
43	GND	power ground
44	XR	Touch panel control pin
45	YU	Touch panel control pin
46	XL	Touch panel control pin
47	YD	Touch panel control pin
48	NC	No connect
49	NC	No connect
50	NC	No connect

Item	Dimension	Unit
Size	2.8inch	inch
Dot Matrix	240RGB320(TFT)	dots
Module dimension	50.0069.202.55	mm
Active area	43.20*57.60	mm
Dot pitch	0.180*0.180	mm
LCD type	TFT/TRANSMISSIVE
View Direction	6 O’CLOCK
Gray Scale Inversion Direction	12 O’CLOCK
Backlight Type	LED, Normally White
LCD Controller IC	ILI9341V
Pcap Controller IC
LCD Interface	MCU&RGB
Pcap Interface
Touch Panel	RESISTIVE
Surface	ANTI-GLARE